Process data set overview page

Data set: Antitwin Data cable U/UTP 6 4P awg 23 EC400 (00.04.000)

View entire data set

Download data set as XML file

Download as ZIP file

Full name Antitwin Data cable U/UTP 6 4P awg 23 EC400

Location NO

Reference year 2021

Valid until 2026

Reference flow(s) Antitwin Data cable U/UTP 6 4P awg 23 EC400 - 1.0 * 1.0 m (Length)

Type EPD

Parameterized? no

LCIA results included? yes

Category Bygg

Synonyms

Use advice for data set Cradle to Gate. The following stages have been declared: A1-A4

Data set use approval

General comment Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Data from material supplier and the LCA generator has been accepted "As-Is" Data from processing TECCON in-house has been repeated ongoingly without major deviations. Figures given in document are worst case values. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. The allocation is made in accordance with the guidelines given in EN 15804. Raw material - Information derived from manufactory and from a LCA generator Processing: Derived from actual measurements during production of the individual units/stages. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. All major materials have been included. Substance representing <1% have not been included. This include folio film for packaging!

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Fredrik Moltu Johnsen - Norsus

License and access conditions Copyright yes License type Free of charge for all users and uses

Owner of data set Elektroskandia Norge AS

Technical purpose U/UTP cat 6 cable, unscreened, used in data communication networks with 400MHz bandwidth capacity. The cable can be used indoor, fixed installed in dry and moisty environment's, and outdoor if protected against UV. May not be buried. The cable are Halogen Free, Non Corrosive and Flame retardant, meet EN 50575 classification Dca. CABLE Construction standards ISO/IEC 11801; EN 50173; IEC61156-5EN50288-1; ANS/TIA/EIA 568-C2

Input Products No records found.

Co-Products No records found.

Data set version 00.04.000

Time stamp (last saved) 2021-08-10T12:35:22

Data set format

Compliance systems EN 15804 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo