Process Data set: Barrier 90, Jotun Paints Europe Ltd. (UK) (en) en
A more recent version of this data set exists in the database.
Process information
| Key Data Set Information | |
| Location | GB |
| Geographical representativeness description | Global. Transport to market is not included in this EPD. |
| Reference year | 2020 |
| Name |
|
| Use advice for data set | The flowchart in the figure below illustrates the system boundaries for the analysis, in accordance with the modular principle of EN 15804. The analysis is a cradle-to-gate (A1 - A3) study. |
| Technical purpose of product or process | Barrier 90 is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 1, ISO 12944-5, BS 4652, BS 5493, and AS/NZS 3750.9.1994. The declared product provides excellent corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanized steel substrates. This product complies with ASTM D520 type II zinc dust. Barrier 90 is suitable for structural steel and piping exposed in corrosivity categories up to C5 (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer for coating systems where extended durability is required. Approved in a range of bridge specifications requiring 90% zinc dust content. For information on Green Building Standard credits, see "Additional Information" on page 4. The material composition of the declared mixed product is given below: |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: The CEPE database is used as basis for the raw material composition. Specific data for the product composition and raw material amounts has been provided by the manufacturer and represents the production of the declared product. Production site data was collected in 2015. Representative data from ecoinvent v3.2 was used for other processes. The data quality for the material input in A1 is presented in tabular form. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy, water and waste production in-house is primarily allocated equally among all products through mass allocation. Specific allocation was performed for certain waste flows according to information provided by the site manager. VOC emissions have been allocated entirely to the production of solvent based paints. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and essential energy is included. The production process for raw materials and energy flows with very small amounts (less than 0.1 % dry matter) are not included. In total, more than 99% of the material input is included. These cut-off criteria do not apply for non-energy related emissions (such as wastes, hazardous materials and substances). |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Time representativeness | |
| Data set valid until | 2025 |
| Time representativeness description | "01.01.0001" - "01.01.0001" |
| Technological representativeness | |
| Technology description including background system | Barrier 90 Comp A: 6 part(s) Barrier 90 Comp B: 1 part(s) Density: 2.9 kg/l Solids by volume: 58 ± 2 volume% Dry film thickness: 25 - 90 µm Wet film thickness: 45 - 155 µm Theoretical spreading rate: 23.2 - 6.4 m²/l The most representative and worst case formulation produced at the manufacturing site is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average sized metal packaging, including secondary packaging such as pallets and plastic wrapping. For safety, health and environmental conditions, see the Safety Data Sheet for the declared product on www.jotun.com. For information on technical data, application and use of the product, see the Technical Data Sheet for the declared product on www.jotun.com. |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data entry by | |
| Time stamp (last saved) | 2020-12-14T20:42:13 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | ebadd145-8fbe-4c1a-9952-737543a36c01 |
| Date of last revision | 2020-11-26T13:41:36.95958Z |
| Data set version | 00.03.000 |
| Registration number | NEPD-2573-1299 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
Environmental indicators
Indicators of life cycle